- Home
- Community
- Blogs
- yardgranny6's Blog
- yardgranny6's posts about: cage building
yardgranny6's Blog
- August 2008
- July 2008
- June 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- November 2007
- October 2007
- September 2007
- August 2007
- July 2007
yardgranny6's posts about: cage building
Aug 10, 2007 | 2:31 PM PST
Tags: cage building , photos
Here are three pix of the cage as I built it. First pix shows one side of a screen with the two blocks screwed on. You go right through the metal frame into the block. You do this on two screens at the top and the bottom. When you finish you have two screens with four blocks and two screens without. Four screens in all.
Then you place the other two screens as close to the edge of the blocked screens as you can leaving no gaps. You want a solid cage. Again screw right through the metal frame into the ends of the block that are attached to the first screens.
http://i204.photobucket.co
m/albums/bb238/yardgranny6/mis
cellaneous810001.jpg
http://i204.photobucket.co
m/albums/bb238/yardgranny6/mis
cellaneous810003.jpg
The above pix is also the side you place your hinges for the top of the cage. Screw again right through the metal frame at the side and into the top edge of the block and frame of the top screen.
http://i204.photobucket.co
m/albums/bb238/yardgranny6/mis
cellaneous810004.jpg
Someone let me know if this makes any sense at all. WOW! Easier done than described. Linda B of SC
